Charge your 3.7V lithium batteries safely and easily with the TP4056 Charging Board (Type-C) from QKZEE Technologies. This compact module charges single-cell Li-ion / Li-Po batteries at up to 1A from any 5V USB Type-C source, and its built-in DW01 + 8205A protection circuit guards your battery against over-charge, over-discharge, over-current and short circuits.

On-board dual LED indicators show charging and full-charge status at a glance. Connect your battery to the B+ / B- pads and power your project from the protected OUT+ / OUT- pads — ideal for DIY power banks, portable Arduino / ESP32 projects, IoT devices and LED lighting builds.

Key Features

• TP4056 linear charging IC — up to 1A charging current
• Modern USB Type-C input (4.5V – 5.5V)
• 4.2V full-charge cut-off for single-cell 3.7V Li-ion / Li-Po batteries
• Built-in DW01 + 8205A battery protection (over-charge, over-discharge, over-current, short-circuit)
• B+ / B- battery pads and OUT+ / OUT- protected output pads
• Dual LED indicators for charging and full-charge status
• Compact size — fits easily into power banks and portable builds

How to Use

1. Solder your 3.7V single-cell Li-ion battery to the B+ (positive) and B- (negative) pads. Never connect the battery reversed.
2. Plug a 5V USB Type-C charger or cable into the Type-C port to start charging.
3. The red LED lights while charging; the second LED lights when the battery is full (4.2V).
4. Connect your project or load to the OUT+ and OUT- pads — this output is protected by the DW01 circuit.
5. Do not exceed 5.5V on the input, and use only single-cell 3.7V lithium batteries.

Specifications

Pair it with other project essentials from our Modules category and Arduino-compatible boards to build complete portable projects. Cash on delivery available all over Pakistan with 3–4 working days delivery.

Frequently Asked Questions

What is the TP4056 Type-C board price in Pakistan?
The TP4056 Type-C charging board is available at QKZEE Technologies for Rs 50 (sale price).

Which batteries can I charge with the TP4056?
It charges single-cell 3.7V lithium batteries such as 18650 Li-ion cells or Li-Po packs. Do not use it with multi-cell packs.

What is the charging current of the TP4056 module?
The default charging current is up to 1A from a 5V USB Type-C input.

Does this board have battery protection?
Yes. The on-board DW01 + 8205A protection circuit guards against over-charge, over-discharge, over-current and short circuits.

Can I power my project directly from the board?
Yes — connect your load to the OUT+ / OUT- pads, which provide protected output from the battery.

Is the TP4056 good for Arduino and ESP32 projects?
Yes. It is widely used to make portable Arduino, ESP32 and IoT projects by charging the lithium battery that powers them.